MFS Undercut Bolt Drilling Machine,Portable Drill Machine 

MFS Undercut Drilling Machine Information:

Item: Undercut Drill Machine

Mark: MFS

Model No.: JR1042

Country of Origin : China

Usage: Used for drilling the special hole for undercut anchors in Stone,Granite,Ceramic Tile.

Technical of Undercut Drilling Machine:

Specialty of MFS Drill Machine:

Easy to Take,Best Quality,Low Price.

1.Reasonable structure design, portable,simple operation and strong practicability.

2.It’s use Bosch motor, high speed, lowenergy consumption, stable performance, long service life, etc.

3.Suitable for all kinds of stone material,ceramic plate, glass plate, plate, marble,mfs back bolt hole drilling of variousplates of work and its hole. This machine is applicable now stone curtain wall,glass curtain wall project need all dry hanging back bolt holes.

4.Borehole Rio as a molding, as easy tocarry and operation can be either a single operation also can use the combinedmachine! Also can cooperate with large mfs punching machine as a back pin hole forsingle and scattered living ending! Use of flexible, reduces the plates move.

5. Cooperate with the use of bit: cooperatewith the use of M6 and M8, etc all kinds of sintering type diamond stone drillhead.

Using Cautions of Portable Drill Machine 

1.Insert the power supply, it must beinstalled leakage protector, and make the power cord from the ground to keep acertain distance;

2. The equipment must first open the watervalve, before running for bit front there is water overflowing, may start;

3. Ensure the cooling water pressure in the3 kg/cm2, and keep the water without sundry, to prevent clogging.

4. Manual drilling, down tinto hole areforbidden to handle. After the straight hole in place, can be the Rio holehandle. Both mfs drilling and its hole, don't handle pressure is too large,

the movement wants. Bore Rio is completed, should be loose pioneering handle, andthen let go of drilling handle.

TheSize of Drilling Hole

Photos of MFS Undercut Anchor Drill Machine

Packing of Undercut Drilling Machine

Note: 

 1.We have large stock of MFS Undercut Bolt Drilling Machine,if you need,we can arrange the delivery by TNT,DHL,FEDEX immediately.

2. The volts of MFS Undercut Drilling Machine is 220V,if you are from USA,Canada,Japan,you should buy a converter for enough power to start well our machine. 

3.Please check and study carefully the Instruction of the MFS Undercut Drilling Machine before you start it.It is very important.

4.If you still don't know how to use MFS Undercut Drilling Machine after receiving it.Please feel free to connect us,our engineer will tell you how to do. 

You can check our other undercut anchors,drill bit,drill machine quickly below.